(303) 791-7918
24/7 Repair Service 2hr Emergency Response Time
Related Product:
Spanco Workstation Jib Cranes offer easy, ergonomic lift and transfer of repetitive loads. These small, nimble cranes are faster than motorized jibs and very affordable. Our workstation jibs can be permanently floor-mounted, portable with counterweight bases, or wall-mounted to best suit your needs:
Spanco Freestanding Articulating Jib
Spanco Articulating Jib Cranes can lift loads around corners and columns, reach into or under machinery and containers, and service virtually any point between the pivot anchor and the far reach of the boom.
These jib cranes support nearly any type of manipulator, balancer, or hoist. Plus, Spanco is the only manufacturer to offer internally piped air in its articulating jib cranes. Our articulating jibs can be mounted on your floor, wall, ceiling, or bridge crane to best suit your needs. These jib cranes support nearly any type of manipulator, balancer, or hoist.
402 Series Freestanding Articulating Jib Cranes
- Easy installation at nearly any location.
- Offers 360-degree rotation for inner and outer arms.
- Anchor bolts are used to secure the baseplate to a reinforced concrete foundation for ultimate stability under load.
- The pipe mast's connection to the hexagonal baseplate is reinforced with six equally spaced knee braces.
Crane Rotation: freestanding & ceiling/bridge mounted: 360°
Wall-Mounted: 200° for inner arm, 360° for outer arm
Spans: up to 16’
Capacities: from 150 to 2000 lbs
These jib cranes support nearly any type of manipulator, balancer, or hoist. Plus, Spanco is the only manufacturer to offer internally piped air in its articulating jib cranes. Our articulating jibs can be mounted on your floor, wall, ceiling, or bridge crane to best suit your needs. These jib cranes support nearly any type of manipulator, balancer, or hoist.
402 Series Freestanding Articulating Jib Cranes
- Easy installation at nearly any location.
- Offers 360-degree rotation for inner and outer arms.
- Anchor bolts are used to secure the baseplate to a reinforced concrete foundation for ultimate stability under load.
- The pipe mast's connection to the hexagonal baseplate is reinforced with six equally spaced knee braces.
Crane Rotation: freestanding & ceiling/bridge mounted: 360°
Wall-Mounted: 200° for inner arm, 360° for outer arm
Spans: up to 16’
Capacities: from 150 to 2000 lbs
Related Product:
Spanco Workstation Jib Cranes offer easy, ergonomic lift and transfer of repetitive loads. These small, nimble cranes are faster than motorized jibs and very affordable. Our workstation jibs can be permanently floor-mounted, portable with counterweight bases, or wall-mounted to best suit your needs:
Spanco Freestanding Jib Cranes install almost anywhere, including outside. These foundation-mounted, freestanding jibs offer higher capacities, longer spans, and greater rotation than our wall-mounted jib cranes: