(303) 791-7918
24/7 Repair Service 2hr Emergency Response Time
Magnetek IMPULSE T
Magnetek’s IMPULSE•T has made drive programming so easy you can get your crane up and running in a few simple steps. This affordable drive platform makes the IMPULSE•T the ideal solution for contactor control upgrades and basic modernizations.
Magnetek's new IMPULSE®•T is the ideal low-cost, easy to configure variable frequency drive for CMAA Class A-D traverse motions.
Magnetek's IMPULSE•T has made drive programming so easy you can get your crane up and running in a few simple steps. This affordable drive platform makes the IMPULSE•T the ideal solution for contactor control upgrades and basic modernizations.
The IMPULSE•T comes standard with a 120VAC digital interface card with 5 programmable inputs, and can also be fitted with 48VAC, 24VAC, and 24VDC interface cards to meet unique design needs.
UL® recognized motor overload protection comes standard with the IMPULSE•T, protecting your motor and peripheral electronics from damage when a mechanical failure occurs. Preventative maintenance monitors provide the feedback you need to proactively schedule maintenance and minimize downtime.
Performance Features
- Digital and analog reference sources
- Up to 8-speed multi-step digital speed reference
- 2-step infinitely variable speed reference
- 1 analog speed reference: 0-10VDC, 4-20mA, 0-20mA
- Built-in dynamic braking transistor
- 1 form C output contact 1 A at up to 250VAC or 30VDC
- 1 analog monitor output: 0-10VDC proportional to output frequency or current
- X-Press Programming™ allows programming initial setup within seconds
- Maintenance timers - operations, cooling fan, soft charge bypass relay, and IGBT
- Fully adjustable volts/hertz pattern
- DC injection braking
- Electronic reversing motor leads
- Automatic fault reset
- Adjustable acceleration/deceleration: 0.0 to 25.5 seconds
- Fault history
- Hardware and software current limit
- CMAA Class A-D Service
- Overload capacity: 120% for 60 sec.
- 40: 1 speed range
- Starting torque of 150% @ 3Hz
- Certifications: UL, cUL, RoHS, CE
- Ambient service temperature: -10° to 50°C (+14° to 122°F)
- Input voltage: 200 to 240VAC, 380 to 480VAC, -15% to + 10%
- Input frequency: 50/60 Hz; ±-5%
Magnetek's new IMPULSE®•T is the ideal low-cost, easy to configure variable frequency drive for CMAA Class A-D traverse motions.
Magnetek's IMPULSE•T has made drive programming so easy you can get your crane up and running in a few simple steps. This affordable drive platform makes the IMPULSE•T the ideal solution for contactor control upgrades and basic modernizations.
The IMPULSE•T comes standard with a 120VAC digital interface card with 5 programmable inputs, and can also be fitted with 48VAC, 24VAC, and 24VDC interface cards to meet unique design needs.
UL® recognized motor overload protection comes standard with the IMPULSE•T, protecting your motor and peripheral electronics from damage when a mechanical failure occurs. Preventative maintenance monitors provide the feedback you need to proactively schedule maintenance and minimize downtime.
Performance Features
- Digital and analog reference sources
- Up to 8-speed multi-step digital speed reference
- 2-step infinitely variable speed reference
- 1 analog speed reference: 0-10VDC, 4-20mA, 0-20mA
- Built-in dynamic braking transistor
- 1 form C output contact 1 A at up to 250VAC or 30VDC
- 1 analog monitor output: 0-10VDC proportional to output frequency or current
- X-Press Programming™ allows programming initial setup within seconds
- Maintenance timers - operations, cooling fan, soft charge bypass relay, and IGBT
- Fully adjustable volts/hertz pattern
- DC injection braking
- Electronic reversing motor leads
- Automatic fault reset
- Adjustable acceleration/deceleration: 0.0 to 25.5 seconds
- Fault history
- Hardware and software current limit
- CMAA Class A-D Service
- Overload capacity: 120% for 60 sec.
- 40: 1 speed range
- Starting torque of 150% @ 3Hz
- Certifications: UL, cUL, RoHS, CE
- Ambient service temperature: -10° to 50°C (+14° to 122°F)
- Input voltage: 200 to 240VAC, 380 to 480VAC, -15% to + 10%
- Input frequency: 50/60 Hz; ±-5%
Related Product:
If your motor control application is in an environment requiring a NEMA type 7/9 enclosure, consider enhancing your upgrade with a ready-to-go and pre-engineered control panel to make your installation quick and easy!
